This tool is required to remove the clutch from certain model saws.
You will need this tool to replace your clutch and drive sprocket.
Each tool has a 19mm nut fitting so you can easily adapt a socket or bar wrench to torque.
Clutches are reverse threaded, so be sure to turn the proper direction.
A piston stop is also helpfull for this task as you need to lock the piston/crank assembly to losen and tighten the clutch. PISTON STOP
MODEL FIT: HUSQVARNA 362, 365, 371, 372, 570, 575, 576. JONSERED 2063, 2065, 2071, 2163, 2165, 2171