ITEM: CLUTCH REMOVAL/ PULLER
This tool is required to remove the clutch from certain model saws.
You will need this tool to replace your clutch and drive sprocket. X
Each tool has a 19mm nut fitting so you can easily adapt a socket or bar wrench to torque.
Clutches are reverse threaded, so be sure to turn the proper direction.
A piston stop is also helpfull for this task as you need to lock the piston/crank assembly to losen and tighten the clutch. PISTON STOP
MODEL FIT: ECHO CS 370, CS 400, CS-440, CS 450, CS 510, CS 520, CS 590, CS 600, CS 4500, CS 4600, CS 5000, CS 5500