ITEM: CLUTCH PULLER TOOL
This tool is required to remove the clutch from certain model saws.
You will need this tool to replace your clutch and drive sprocket. X
Each tool has a 19mm nut fitting so you can easily adapt a socket or bar wrench to torque.
Clutches are reverse threaded, so be sure to turn the proper direction.
A piston stop is also helpfull for this task as you need to lock the piston/crank assembly to losen and tighten the clutch. PISTON STOP
MODEL FIT: CS CS-300, 301, 303T, 305, 306, 310, 330, 330T, 340, 341, 346, 350TES, 352, 355T, 360T, 361P WITH CLUTCH'S THAT USE 3 CLUTCH SPRINGS